Well…poop

Section

Hours

6 - Vertical Stabilizer - Done

15.5

7 - Rudder Assembly - Done

8 - Horizontal Stabilizer - Done

9 - Elevator Assembly - Done

72.25

10 - Aft Fuselage - Done

11 - Empennage Attach

12 - Empennage Fairings

13 - Main Spar

30.75

14 - Wing Ribs

50.25

15 - Rear Spar

24.25

16 - Top Skins

21.25

25 - Fuse Bulkheads - Done

26 - Mid-use Lwr Structure - Done

32.5

27 - Firewall - Done

28 - Fwd-fuse Lwr Structure - Done

30.5

29 - Fwd-fuse Sides - Done

93.25

30 - Aft Fuse Attach - Done

16.75

31 - Fuel System - Done

32 - Baggage Area - Done

24.5

33 - Rudder & Brake Systems - Done

20.5

34 - Flap Motor - Done

35 - Upper Fwd Fuselage - Done

36 - Aileron & Elevator Systems - Done

22.25

37 - Roll Over Structure - Done

15.75

This is a page dedicated to all of the missteps, goof-ups, and downright stupidity that comes at the hands of my feeble attempt at building an airplane.

May 19, 2019

Today I dimpled the Vertical Stabilizer skin where there was no hole. A quick call to Vans had me reversing the dimple dies to flatten out the erroneous dimple and all is well. Build on!